Project Gallery
Real installations, photographed by the technicians who did them.
CCTV cameras and monitoring walls, face and fingerprint attendance, access control, anti-theft gates, network racks, fibre and satellite systems installed by Sizcom Technology across Abu Dhabi.
CCTV installation in Abu Dhabi
Cameras planned, cabled and commissioned by our own technicians, with recording set up to Abu Dhabi Monitoring and Control Centre (ADMCC) requirements. Supermarkets, clinics, villas and open yards.
What a job like this usually includes
- IP and analogue cameras
- NVR with 30-day recording
- ADMCC registration
- Remote viewing on your phone
- Night vision and outdoor poles
-
40-channel CCTV monitoring wallLive view of a supermarket's IP cameras on one display, with every aisle, checkout and entrance covered. -
Four-way camera poleBullet cameras on a single pole covering an open yard in every direction, with infrared night vision. -
Dome cameras fitted during fit-outCeiling domes positioned before the shelving went in, so no aisle is left blind once the store opens. -
NVR viewing stationReception monitoring PC for a clinic, with camera groups per floor and 30 days of recording. -
Mounting on an existing poleWeatherproof junction boxes fixed before the cameras go on, with cables run inside the pole. -
Checkout and aisle coverageSecond display at the same site, grouping checkout lanes, entrances and stock areas for the duty manager. -
Night test after installationPerimeter camera checked after dark to confirm infrared range and focus before handover. -
Indoor dome in a corner mountCompact dome placed where one unit covers the whole room and the door. -
Camera points marked on a new floorPlanning camera and network points while a supermarket was still being fitted out.
Access control, biometric and anti-theft security
Face recognition, fingerprint attendance, keypad readers, smart locks and anti-theft gates, installed and linked to your attendance or door system. Staff are trained before we leave.
What a job like this usually includes
- Face and fingerprint attendance
- Card and keypad door access
- Smart locks for villas
- EAS anti-theft gates for shops
- Payroll and HR exports
-
Face recognition attendance terminalZKTeco face reader at a staff entrance, recognising in under a second and logging attendance for payroll. -
Fingerprint time and attendanceHikvision fingerprint terminal with PIN backup, exporting attendance reports to payroll. -
Keypad and card reader on a gateWeatherproof access reader on a pedestrian gate, wired to an electric strike and exit button. -
Smart door lockEZVIZ fingerprint and app-controlled lock fitted to a villa's timber front door. -
Anti-theft gate at a shop entranceEAS security pedestal being commissioned at a retail entrance to stop tagged goods leaving unpaid. -
Twin EAS pedestalsPair of anti-theft gates aligned at the shopfront, ready for tag testing.
Watch: anti-theft gate installation at a new shop
Short clips from the same job, from unboxing the pedestals to the first tag test. Tap to play, sound is off by default.
- Wiring the EAS pedestalConnecting the antenna loop and controller inside the pedestal base.
- Fixing the pedestal to the floorAnchoring the gate and dressing the cable before the cover goes on.
- Unboxing and positioning the gatesSetting the pedestal spacing at the entrance before anchoring.
Networking and structured cabling
Racks, patch panels, Cat6 and fibre, dressed so the next technician can read them. Comms rooms for offices, retail and villas, tested and labelled before handover.
What a job like this usually includes
- Cat6 and Cat6A structured cabling
- Fibre splicing and termination
- Rack build and cable dressing
- Switches, routers and firewalls
- Test reports and labelling
-
Patch panels with fibre uplink96 Cat6 ports terminated and labelled, with a single-mode fibre uplink to the core. -
Floor-standing network rackNew rack with Cat6 patch panels and a PoE switch, cables entering from the ceiling tray. -
Cable tray above the ceilingBundled Cat6 runs on a perforated tray, tied and kept separate from power. -
Cable dressing inside the rackCat6 bundles routed and bent to radius before termination, with no slack left behind the panels. -
Core rack with switches and ONTManaged switches, router, fibre ONT and UPS in one rack, each port patched and labelled. -
Comms room rack42U rack housing switches, NVR and servers in a dedicated, cooled room. -
Wall cabinet for a small officeLockable wall-mount cabinet with patch panel, switch and router, enough for a shop or small office. -
Fibre termination boxSingle-mode fibre spliced and coiled in a termination box, SC/APC pigtails ready for patching. -
Rack after commissioningPatched and labelled rack with doors fitted, ready for handover and the test report. -
Fibre patch panel and firewallSC/APC fibre patch panel with a Fortinet firewall below, every link labelled at both ends. -
Compact cabinet for a villa6U wall cabinet with router and switch feeding Wi-Fi access points and cameras.
Satellite TV, PA and distribution
SMATV headends, satellite dishes and public address horns for compounds, labour camps, hotels and schools.
What a job like this usually includes
- SMATV and IPTV headends
- Satellite dish alignment
- Outdoor PA and alarm horns
- Multiswitch distribution
Want the same for your site?
Tell us the kind of building and what you need covered. We visit, count the points, and send a fixed quotation with brands and model numbers listed.
Send us a photo or a floor plan on WhatsApp and we will reply with a camera or cabling count the same day.
Can you do the same installation at my shop or villa?
Yes. Send a photo or floor plan on WhatsApp or book a free site survey. We count the camera, door or network points, then send a fixed quotation with brands and model numbers.
Who takes these photos and are they real jobs?
Every photo and video on this page was taken by Sizcom technicians on customer sites in Abu Dhabi. We do not use stock images in the gallery.
How long does a CCTV or network installation take?
A villa or small shop with up to 8 cameras is usually finished in one day. A supermarket or office with 30 to 60 cameras and a full network rack takes 3 to 7 working days, planned around your opening hours.
Do you register CCTV with ADMCC?
Yes. Sizcom is an ADMCC-approved installer. Where a premises needs Abu Dhabi Monitoring and Control Centre compliance, we design to the standard, prepare the documentation and handle the registration.
Can I get a copy of the photos and test reports after my job?
Yes. Every project is handed over with photos, a labelled port or camera list, test reports for cabling and the login details for your recorder or attendance system.
Ready when you are
From a single camera to a full comms room, the same technicians you see above will do the job.